Manual

Product Number: DTK579

Shipping and Storage

1. Unopened reagents, calibration samples, and quality control samples are stored at 2℃ to 8℃ with a validity period of 12 months;
2. After opening the reagent, be careful to store it away from light and avoid contamination. It can be stored for 28 days at 2℃ to 8℃. Calibration and quality control products can be stored in the dark at 2℃ to 8℃ after reconstitution, and can be stored for 28 days.
3. Please place the reagent kit vertically to ensure that the magnetic particles are fully effective during the automatic mixing process before use.
4. The production date and expiration date can be found on the product label.

Component

1. Specification 1:

Reagent	Component	Concentration
Reagent 1 (R1)	Biotin labeled human beta amyloid 1-40 antibody	0.5mg/L
	TRIS buffer solution	100mmol/L
	Preservative	0.1%
Reagent 2 (R2)	Acridine ester labeled human β - amyloid 1-40 antibody	0.5mg/L
	PBS buffer solution	100mmol/L
	Preservative	0.1%
M	Streptomycin coated magnetic particles
	PBS buffer solution	100mmol/L
	Preservative	0.1%

Calibration standards: recombinant antigen of human β - amyloid protein 1-40, calf serum, preservatives;

Quality control products:recombinant antigen of human β - amyloid protein 1-40, calf serum, preservatives;

Note: The components of different batch numbers of reagent kits cannot be interchanged.

• Specification 2:

Reagent	Component	Concentration
Magnetic particles (M)	Magnetic particle coated human beta amyloid 1-40 antibody	0.5mg/L
	TRIS buffer solution	100mmol/L
	Preservative	0.1%
Reagent (R)	Acridine ester labeled human β - amyloid 1-40 antibody	0.5mg/L
	PBS buffer solution	100mmol/L
	Preservative	0.1%

Calibration standards: recombinant antigen of human β - amyloid protein 1-40, calf serum, preservatives;

Quality control products: recombinant antigen of human β - amyloid protein 1-40, calf serum, preservatives;

Note: The components of different batch numbers of reagent kits cannot be interchanged.

Calibration and quality control products have batch specificity, and the specific concentration is obtained through the calibration curve card. Traceability of product calibration standards to internal working calibration standards within the enterprise

Required but not provided materials: pre excitation solution, excitation solution, cleaning solution, reaction cup, etc. for fully automated chemiluminescence immunoassay system.

Application

Used to detect the content of human beta amyloid protein 1-40 (A β 1-40) in human serum and plasma, it is mainly used as an auxiliary diagnosis for Alzheimer's disease in clinical practice.

Specimen collection

1. Serum samples collected in standard test tubes or vacuum tubes with separation gel.
2. The human phosphorylated Tau-181 protein sample should be tested immediately after collection, and serum samples can be stable for 2 days at 2℃ to 8℃; If samples need to be stored for a long time, it is recommended to freeze them at -20℃ or below. They can be stored at -20℃ for 1 month to avoid repeated freezing and thawing, and the number of freezing and thawing should not exceed 3 times.
3. If there is sediment in the sample, please centrifuge before testing.
4. The following samples cannot be used: Heat inactivated specimens; Severe hemolysis, high blood lipid samples; Mixed samples; Samples clearly contaminated by microorganisms.
5. Before testing, please ensure that patient samples, calibrators and quality control products are balanced to room temperature (20℃~25℃) to avoid foam.
6. Considering the possible evaporation effect, the samples, calibration samples, and quality control samples on the machine should be measured within 2 hours.

---